Streptocarpus - Streptocarpus
Contenu:
Streptocarpus (Streptocarpus) appartient à la famille des Gesneriacées. Ce genre comprend plus de cent trente variétés. Cette culture pousse à l'état sauvage dans les territoires asiatiques et africains. Ce genre comprend de la végétation arbustive et herbacée, il peut être à la fois annuel et vivace, tout dépend de la variété. Cette fleur a commencé à être cultivée en intérieur au XIXe siècle. Cette culture est en rosette et la tige est raccourcie. Les feuilles sont larges, lancéolées, à pubescence dense, peuvent être vertes ou panachées. Les fleurs émergent des sinus des feuilles, poussent seules ou deux en bouquet. Le nom "streptocarpus" est apparu en raison du type de fruit, car ils ressemblent à une boîte allongée en spirale. Le buisson commence à fleurir au printemps et se termine à l'automne. En hiver, la plante est dans une courte période de dormance et les feuilles ne tombent pas.
Streptocarpus: description de la plante
Streptocarpus: photo de fleurs
La plante streptocarpus commence à fleurir au printemps et se termine à l'automne.
Nécessite un éclairage lumineux mais diffus. Au printemps et en été, les conditions de température doivent être d'au moins vingt degrés et pas plus de vingt-cinq. Avec le début des jours d'octobre, le régime de température chute à quinze degrés.
Pendant toute la saison de croissance, le streptocarpus est irrigué régulièrement et avec modération. Depuis les jours d'octobre, les arrosages sont réduits, en hiver ils sont effectués en petites quantités, cependant, assurez-vous que la motte de terre dans le conteneur ne se dessèche pas complètement.
Le taux d'humidité doit être modéré. Lorsque le buisson est en croissance active, il est nécessaire d'appliquer un pansement supérieur une fois par semaine. À cet effet, un complexe de minéraux est utilisé.
La plante est en période de dormance du début du deuxième mois d'automne aux jours de février. La greffe est effectuée au début du printemps. Les jeunes plantes sont transplantées une fois par an, les spécimens adultes - une fois tous les trois à quatre ans.
Substrat du sol. Terreau prêt à l'emploi pour Saintpaulia. Ou vous pouvez préparer vous-même le substrat, il contient du sable, de l'humus, des feuilles et de la terre de gazon dans un rapport proportionnel de 1: 1: 2: 3. Si la plante est jeune, alors au lieu d'un sol en gazon, vous devez en prendre un feuillu.
- Méthodes d'élevage : boutures, division du buisson, graines.
- Ravageurs: cochenille, thrips, aleurode, cochenille, tétranyque.
- Maladies: pourriture grise.
Streptocarpus : culture et soins à domicile
Streptocarpus : photo d'une fleur d'intérieur
Niveau d'éclairage.
Lors de la culture du streptocarpus à la maison, il doit être doté d'un éclairage brillant mais diffus. Cette plante poussera bien sur un rebord de fenêtre ouest ou est. Si vous le placez sur un rebord de fenêtre orienté au sud, le soleil direct devra être dispersé sans faute. La fenêtre nord ne convient pas à la croissance en raison du manque de lumière, ce qui affecte négativement la croissance, le développement et la floraison du buisson.
Conditions de température.
Au printemps, en été et dans les premières semaines de la saison d'automne, dans la pièce où le streptocarpus est cultivé à la maison, le régime de température doit être observé entre vingt et vingt-cinq degrés. Depuis le début du deuxième mois d'automne, les conditions de température ont diminué, étant donné qu'elles devraient être de quinze degrés, pas moins.Le régime de température le plus optimal pour transférer la saison hivernale est de quinze degrés.
Arrosage streptocarpe
Au printemps et en été, la fleur de streptocarpus est arrosée régulièrement et avec modération, en veillant à ce que le coma du sol dans le récipient ne se dessèche pas longtemps. À partir du début du deuxième mois d'automne, l'arrosage du streptocarpus est réduit, en hiver, ils sont effectués dans un petit volume, vous devez vous assurer que le mélange de sol ne se dessèche pas. De plus, le liquide ne doit pas y stagner. L'arrosage est effectué avec de l'eau bien décantée à température ambiante.
Taille.
Avec une très faible humidité de l'air, les extrémités des feuilles commenceront à sécher. Ils doivent être coupés à temps avec un couteau tranchant et une planche est placée sous la feuille à ce moment-là.
Top dressing.
La plante streptocarpus est fécondée pendant toute la saison de croissance trois à quatre fois tous les trente jours. À cette fin, un complexe de minéraux est utilisé.
Transplantation.
Les jeunes streptocarpes sont systématiquement transplantés, ou plutôt, une fois par an. Les buissons matures sont transplantés à des occasions plus rares, généralement une fois tous les trois à quatre ans. Les fleurs sont transplantées au début du printemps dans des conteneurs bas de grande largeur, remplis d'un substrat de sol, qui comprend un sol feuillu et gazeux et du sable dans un rapport de 4: 1: 2. En outre, un mélange de sol contenant du sable, de l'humus, du gazon et du sol à feuilles caduques dans un rapport de 1: 1: 3: 2 est utilisé pour le repiquage. À cette fin, un terreau prêt à l'emploi pour Saintpaulias du magasin est utilisé. Pour que le mélange de sol ne soit pas trop humide, on y verse un peu de charbon de bois broyé. Lors de la transplantation d'une jeune plante, la terre de gazon est retirée du substrat.
Streptocarpus : élevage à domicile
- Reproduction en divisant le buisson.
Cette méthode est utilisée pour les buissons de la fleur de streptocarpus d'intérieur, qui ont très bien poussé. Tout d'abord, le sol dans le récipient est arrosé avec un petit volume de liquide, puis la plante est retirée du pot, la terre est retirée des racines. Ensuite, vous devez prendre un couteau aiguisé, séparer une partie de la racine épaissie avec des feuilles. Il est nécessaire de laisser les parties séparées pendant un certain temps dans la rue pour un bon séchage des sections, après quoi elles sont traitées avec du charbon sous forme de poudre. Le récipient préparé est rempli aux deux tiers de sa partie avec un mélange de sol frais, puis une coupe y est placée et saupoudrée d'un substrat jusqu'au collet. Ensuite, le mélange de sol est légèrement compacté, le buisson est arrosé avec de l'eau tiède. Pour la survie de la partie séparée, le conteneur est recouvert de polyéthylène sur le dessus. Pour accélérer l'enracinement et favoriser la croissance des jeunes feuilles, vous pouvez raccourcir les grandes feuilles de ½ voire les couper. Après un certain temps, la floraison du buisson commencera.
- Méthode de propagation des graines.
Le semis des graines est effectué dans un petit pot, et les graines sont également réparties sur la couche superficielle du sol. Ensuite, le pot est recouvert de verre sur le dessus. Les plantations sont arrosées dans la partie inférieure de la palette, de plus, elles doivent être régulièrement ventilées, l'éclairage doit être vif, mais diffus, la température doit toujours être d'environ vingt et un degrés. Pour éviter d'abaisser les conditions de température, une feuille de papier est placée au-dessus du verre. Mais il est conseillé de garder les plantations non pas sur la fenêtre, mais de les compléter avec des phytolampes. Après six semaines, le matériau de revêtement se déplace un peu, puis il est complètement retiré. La première fois que les plantes plongent dans un récipient plus grand que le précédent, l'intervalle entre les semis n'augmente pas beaucoup. Afin d'éviter de blesser les plantes au moment de la plongée, la transplantation est effectuée avec soin. Tout d'abord, vous devez frapper un peu sur les parois du récipient, puis le plant est doucement repoussé avec une aiguille et transplanté dans un nouveau pot, tout en tenant les feuilles avec les doigts.Le mélange de sol est légèrement compacté, après quoi les plantations sont arrosées, puis le pot est placé dans une palette et transféré à la chaleur, dessus est recouvert de verre ou de polyéthylène. La deuxième fois, les plantes plongent dans des conteneurs séparés. Pour un bon développement, les plantules sont nourries.
Le semis de céréales peut être effectué plus d'une fois par an, et cette procédure est effectuée en toute saison. Vous obtenez des buissons qui fleurissent à des moments différents.
- Multiplication par bouturage.
Les jeunes feuilles saines et bien développées d'une fleur d'intérieur streptocarpus, non affectées par les maladies et les ravageurs, sont coupées dans un buisson, puis les pétioles sont coupés avec un matériau pointu. Une fois que les endroits des coupes ont séché, le pétiole est planté dans un petit récipient et il est installé directement. Après cela, une pulvérisation d'une solution de fongicide est effectuée et le pot est recouvert de polyéthylène. Ensuite, le conteneur est placé dans une pièce avec un bon éclairage et une température positive. Après quatre à six semaines, de jeunes pousses apparaissent. Après avoir poussé et renforcé, la plante est transplantée dans un conteneur permanent. Si vous cultivez différentes variétés de cette culture, collez les autocollants de nom sur les pots.
Afin de propager le streptocarpus, une partie de la foliole est utilisée. A cet effet, la feuille est posée avec l'extérieur sur une planche, puis avec une lame tranchante elle est divisée en bandes de cinquante mm de large. La feuille est coupée dans un plan perpendiculaire par rapport à la nervure centrale. Les parties inférieure et supérieure de la foliole sont jetées, les parties restantes sont plantées dans les fosses avec la partie inférieure du pétiole vers le bas à un angle de quarante-cinq degrés. Il devrait y avoir un intervalle de trente mm entre les semis, pas moins. Ensuite, une pulvérisation d'une solution fongicide est effectuée, après quoi le récipient est recouvert de polyéthylène sur le dessus et transféré dans une pièce très humide, où des conditions de température sont observées dans la plage de vingt à vingt-deux degrés. Les pétioles sont arrosés à travers la palette, et ils doivent également être ventilés tous les jours. Les jeunes pousses apparaîtront dans six à huit semaines.
La fleur de Streptocarpus peut se multiplier par la partie longitudinale de la foliole. A cet effet, la feuille est posée sur la planche avec l'extérieur, puis la veine centrale est séparée avec une lame pointue. Dans 2 parties de la feuille, les coupes sont saupoudrées de charbon sous forme de poudre. Après cela, ils sont plantés dans les fosses avec la pointe de coupe vers le bas, ils sont enterrés sur un tiers de la longueur du pétiole de la feuille, puis le mélange de sol est légèrement compacté, puis l'arrosage est effectué et le récipient est recouvert de polyéthylène sur le dessus. Le pot est déplacé dans une pièce avec un bon éclairage et une température de l'air favorable. Les plantules apparaîtront sur toute la feuille dans le plan longitudinal à partir des nervures latérales. La nervure centrale de la face interne de la feuille est coupée en morceaux égaux à 20 mm tous les deux cm.Ensuite, la coupe avec la face interne est épinglée à la couche de sol superficielle, puis le traitement est effectué avec une solution fongicide. En haut du palier, ils sont recouverts de verre, puis transférés dans une pièce bien éclairée, et l'endroit doit également être protégé du soleil direct. Après l'émergence des jeunes pousses, le matériau de couverture se déplace légèrement.
Après avoir transplanté les buissons de streptocarpus cultivés et mûris dans des récipients séparés, les premiers jours, ils sont recouverts de polyéthylène. Après avoir enlevé le couvert pour les semis, le même soin est apporté que pour la végétation adulte.
Difficultés à faire pousser une fleur d'intérieur
- L'apparition de la pourriture grise. Avec trop d'arrosage, la plante peut être endommagée par la pourriture grise.
- Bourgeons de forage. La raison en est un régime de température très élevée.
- Les bords des feuilles brunissent. Raisons : l'eau stagne dans le terreau ; très faible humidité de l'air.
- Ravageurs. Dans des cas fréquents, le buisson est attaqué par des thrips, des tétranyques, des cochenilles, des aleurodes et des cochenilles.
Streptocarpus: variétés et espèces avec noms et photos
- Streptocarpus Blanche-Neige (Streptocarpus candidus).
Cette culture est rosette. Les feuilles se froissent, une quinzaine de cm de large, jusqu'à quarante-cinq cm de long.Le buisson fleurit magnifiquement. La surface des fleurs blanches, longues de 25 mm, présente des lignes violettes. La lèvre inférieure de la fleur a des rayures de couleur violette et la gorge a des points violets.
- Streptocarpus Grand (Streptocarpus grandis).
Ce buisson n'a qu'une seule feuille, d'une trentaine de cm de large, jusqu'à quarante cm de long. la gorge est plus foncée, plus la lèvre inférieure est blanche.
- Streptocarpus Bleuet (Streptocarpus cyaneus).
Bleuet Streptocarpus: photo de la variété
La fleur est en rosette, la tige pousse jusqu'à quinze cm.Les fleurs sur la tige sont de couleur rose, rassemblées en deux dans un bouquet. Le milieu est jaune et la surface de la gorge est couverte de rayures et de points violets.
- Streptocarpus wendlandii.
Streptocarpus Wendland: photo de la variété
La patrie de cette espèce est le sud du continent africain. La plante n'a qu'une seule feuille, atteignant un mètre de long, une largeur de plus de cinquante cm, la surface de coloration vert foncé a des veines plus pâles. À partir des sinus d'un pédoncule allongé, les fleurs atteignent une taille de cinq cm, la corolle est peinte en violet foncé, la surface du pharynx est recouverte de rayures blanches.
- Streptocarpus glandulosissimus (Streptocarpus glandulosissimus).
Streptocarpus Glandulosissimus: photo de la variété
Cette variété peut être trouvée à l'état sauvage dans les régions montagneuses d'Ulugur et d'Uzambar. La tige pousse jusqu'à quinze cm.La couleur des fleurs peut être différente, du bleu foncé au violet.
- Streptocarpus johannis (Streptocarpus johannis).
La tige est verticale. Fleur de rosette. Les feuilles mesurent une dizaine de cm de largeur, jusqu'à une cinquantaine de cm de longueur.La tige porte une trentaine de fleurs bleu-violet, de 20 mm de diamètre.
- Streptocarpus du roi (Streptocarpus rexii).
Streptocarpus king: photo de la variété
Le streptocarpus du roi est une culture en rosette. Patrie - le sud du territoire africain. La surface des feuilles oblongues lancéolées est pubescente, elles mesurent cinq cm de largeur et jusqu'à vingt-cinq cm de longueur. , atteint environ cinquante mm de longueur, en coupe transversale - environ vingt-cinq mm. Les fleurs sont peintes dans une couleur lavande pâle, la surface de la gorge et le tube ont des rayures de couleur violette. Le buisson fleurit longtemps et abondamment.
- Streptocarpus Primevère (Streptocarpus polyanthus).
La patrie de ce streptocarpus est le sud du territoire africain. La feuille est densément pubescente, d'une trentaine de cm de long.Les pédoncules sont longs, portent des fleurs de 40 mm de diamètre, de couleur bleu pâle avec un centre jaune au milieu. Le pharynx est plus pâle, rappelant un puits de château.
- Streptocarpus primulifolius (Streptocarpus primulifolius).
Fleur de rosette. Seules quatre fleurs sont formées du blanc au violet pâle, leur surface présente des points et des rayures. La tige pousse jusqu'à vingt-cinq cm.
- Streptocarpus Rocky (Streptocarpus saxorum).
Streptocarpus Skalny: photo de la variété
De plus en plus sauvage, ce streptocarpus se trouve dans les hautes terres des tropiques à l'est du continent africain à une altitude de plus de mille mètres au-dessus du niveau de la mer. Les tiges pendent, poussent jusqu'à cinquante cm et les feuilles sont opposées. Les fleurs sont légèrement inclinées vers le sol, peintes dans une couleur bleutée, rappelant les fleurs de Saintpaulia.
- Streptocarpus Holst (Streptocarpus holstii).
Le Streptocarpus Holst à croissance sauvage peut être trouvé dans les tropiques du continent africain de l'Est. Les pousses sont juteuses, flexibles, atteignent un demi-mètre.Les feuilles sont ridées, situées en face, leur surface est pubescente, elles mesurent en longueur une cinquantaine de mm. Les fleurs d'un tel streptocarpus sont de couleur violette, mesurent trois cm, le tube de la corolle est blanc.